LUS are a one piece, non-welded, joist hanger for supporting mono trusses and girder trusses from timber members.
- Double shear nailing allows distribution of the carried member's load through two points on each nail for greater strength. It also allows fast installation with fewer nails, using common nails for all connections.
- HGUS Girder Hangers and HUS hangers are tested by TRADA Technology Inc. The HUS carries the TRADA Q-Mark certification
- One hit of the speed prong on some HUS and LUS models positions the hanger for header nailing (not required).
75mm or 90mm nails must be driven at 45° into joist dome or pan nail holes, through the carrying member and into the carried member to achieve the table loads.
LUS -- 1.0mm
