2" Square Recess Drive Bit for EBTY Hidden Deck Fasteners

For use with screws supplied with EBTY Hidden Deck Fasteners. 1 bit is supplied with each deck fastener order.

Hidden deck fasteners create smooth and safe decks, making sure there are no nails, screws or pop ups to mar the beauty or the comfort of the deck. The decking boards are held together by patented polypropylene hidden fasteners, producing a smooth surface that enhances the appearance of the building materials.

The deck fasteners are easy to install, maintenance free, compatible with any climate, invisible from the top or bottom of the deck, and guaranteed to last 100 years.

Installation Guide

• Fasten one side of the first deck board using supplied screws and plugs at 90 degree angle to board
• Place fasteners in groove of board at each joist. Install one screw in each fastener at a 45 degree angle, driven into the joist. Tighten snugly to the EBTY fasteners
• Place the next board so the slot slips over the exposed fastener. Use a clamp to straighten boards, if necessary
• Repeat last two steps until all decking is fastened.

To download the installation information sheet click here.