Open navigation

Osmo Teak Oil Spray

(exc VAT) £13.93 (inc VAT) £16.72

Next working day delivery available on products ordered before 11am.

Delivery options and pricing calculated at cart


Scroll to view more information on this product


* Required Fields

(exc VAT) £13.93 (inc VAT) £16.72


Osmo Teak Oil Spray helps protect, maintain and enhance the appearance of Teak hardwood products, in particular garden furniture, decking, fencing and gates.

At a glance

  • Easy spray application
  • Protects, maintains and enhances exotic hardwood garden furniture, decks and fencing
  • Satin-matt finish
  • Water resistant, dirt repellent and simple to maintain

Easy spray application

Providing a satin-matt, smooth finish, Osmo Teak Oil Spray is highly water resistant, dirt repellent and offers easy maintenance.

Osmo Teak Oil Spray provides a high coverage rate. As a micro-porous finish, Osmo Teak Oil Spray allows the wood to breathe, regulating the moisture content and minimising the risk of splitting, cracking, peeling or flaking.

With easy application, no sanding is required during maintenance, simply spray on a further coat! The resulting surface from Osmo Teak Oil Spray is tested to be resistant against liquids such as wine, beer, soft drinks, tea, fruit juice, milk and water etc, in accordance with German regulation standards.

Natural ingredients

Osmo Teak Oil Spray is based on vegetable oils. These natural ingredients penetrate into the timber, keeping it flexible and healthy and preventing drying or brittleness.  

Environmental concerns

Osmo Teak Oil Spray is free from biocides or preservatives. 

Read more

Application & Maintenance Advice

Surface preparation

  • Ensure wood surface is clean, free from dust and loose fibre and dry. 
  • Existing paints, coats and varnishes must be removed prior to application
  • If possible, apply initial coat to all sides of the wood before installation when protecting new wood. 
  • For hardwoods with an especially high oil content, leave to weather for about 2-3 months. 

Osmo Teak Oil Spray

  • Shake the can well and test before use. 
  • Spray approximately 25cm from surface
  • Ensure any area you do not wish to finish it covered up prior to application
  • Wipe off any surplus fluid with a cloth once sprayed
  • Leave to dry for approximately 12 hours, then spray a second time.
  • When recoating as a maintenance finish, one coat is usually sufficient.
  • Clean the spray nozzle after use.  

Drying time

Osmo paints dry through oxidation - therefore require good ventilation to dry. Approximately 10-12 hours should be expected per coat.
Make sure furniture is thoroughly dry before putting into use. 


Osmo Teak Oil Spray provides a very simple surface to clean. Simply use a moist cloth. Particularly difficult stains can be removed with Osmo Liquid Wax Cleaner.  

Always refer to the packaging and relevant safety information before using Osmo Teak Oil Spray

Exceptional coverage

Containing a high quantity of pigments and oils, Osmo wood finishes leave a stunning surface finish after just one or two coats, without the need for a primer or base coat.

This means you can achieve near to double the square meter coverage with just one tin compared to an ordinary finishing system.

When It comes to the Osmo paint range, no pre-priming is required, saving time and money.


No sanding required

Osmo natural wood finishes can be simply recoated without the need for sanding. This also allows for users to touch up small areas quickly


Natural products

Osmo uses food safe, natural ingredients for the basis of their wood finishes, waxes and pigments, including sunflower, soya, linseed and thistle oil, which is good for customers and wood alike.

Osmo products contain disaromatised white spirit to ensure finishes spread easily, removing the need for so called "Green solvent" materials which can cause allergies.

Natural beauty of oils and waxes

Wood is a natural material, the cell structure, similar to our skin, can take on and release moisture, it breathes. To ensure that this exchange is not prevented we have created finishes especially suited to the character of the wood.

Osmo natural wood finishes are based on oils and waxes, the oil penetrates into the wood surface, protecting from deep within. The waxes form an elastic, micro-porous surface which protects the wood from external influences. The wood remains naturally beautiful, protected and durable.

  • FSC
  • PEFC
  • Trada member
  • Responsible purchaser
  • Cedar Shake & Shingle Bureau
  • nbs plus
  • Secured by