Open navigation

Sansin Wood Cleaner

(exc VAT) £27.79 (inc VAT) £33.35

Next working day delivery available on products ordered before 11am.

Delivery options and pricing calculated at cart

 

Scroll to view more information on this product

27.79

* Required Fields

(exc VAT) £27.79 (inc VAT) £33.35

Description

Sansin Wood Cleaner is a ready to use formula suitable for removing extreme weathering, water stains, mould and mildew, while restoring the natural colour of wood. Sansin Wood Cleaner is biodegradable and rinses off with water for an easy to use solution.

At a glance

  • Removes weathering, mould, algae, mildew and iron stains
  • Easy to use - simply rinse off with water
  • Biodegradable with low VOC
  • Recommended for new and existing wood surfaces such as decks, fencing and cladding
  • Suitable for interior and exterior use

Removes weathering, mould, algae, mildew and iron stains

Sansin Wood Cleaner is a ready to use formula suitable for removing extreme weathering, water stains, mould and mildew, while restoring the natural colour of wood. Sansin Wood Cleaner is biodegradable and rinses off with water for an easy to use solution. 

Recommended for use on new and old wood surfaces such as decks, cladding, fencing and screens

Also includes free 1x 250g of Sansin Wood Lightener. Wood Lightener brightens all wood surfaces, restoring the original natural colour of the wood after Sansin Wood Cleaner treatment. 

Sansin Enviro Stain®

One question we're often asked is whether you should use a water based or oil based coating when protecting wood surfaces. With Sansin Enviro Stains, you can have the best of both worlds.

Enhanced durability and moisture control

Sansin lets wood 'breathe' more freely, dramatically improving dimensional stability and allowing wood to adjust naturally to moisture levels in the environment. Once it bonds with your wood, Sansin forms a long-lasting shield that aggressively repels condensed water while allowing water vapour to escape. 

Protection from UV radiation

As well, the paraffin waxes uded to protect against water in many water and solvent-based coatings are easily damaged by exposure to UV radiation - just 5 hours of direct sunlight can reduce water repellancy by over 60%. Like your own skin, your home needs dependable UV protection. Sansin's modified natural oils and resins are impregnated with special UV protectants so every exposed cell of your wood is protected. Because of their unique formulation, Sansin Enviro Stains also protect nautrally against wood decay. 

Sansin Enviro Stains are designed to keep your wood healthy, just as Mother Nautre intended. Whether it's your home, your deck or your furniture, Sansin provides the long-lasting, beautiful protection your home deserves. 

Every wood coating needs to be maintained - it's just easier with Sansin. 

Where successive film-build coatings can darken and peel, Sansin is design to wear gently over time. Keeping your home protected involves only a simple cleaning and maintenance coat, applied as needed. 

Commited to conservation

Sansin Enviro Stains are low-odour, easy to use, maintain, and their easy on the environment. Sansin's commitment to conservation is paramount and reflected both in their products and business practices. 

News - Silva Timber becomes UK Distributor of Sansin Enviro Stains

Read more

Application Instructions

Preparation

Substrate must be dry
Temperature above 10°C-50°F
Spray vegetation with water or shield off before and during application
Protect bordering areas with drop sheets and/or tape off with poly
Do not allow this product to contact metal, fabric, floor coverings or outdoor furniture

Application Methods
Apply a liberal and uniform application using brush, roller or spray
On vertical surfaces start at the bottom and work your way up

Working Procedure
Do not allow to dry as this will require reapplication
Must lightly mist with water to keep active
Do not apply in direct sunlight
Allow the product to dissolve coating for at least 15 minutes
During waiting period you may agitate coating using a stiff brush, always agitate in direction of wood grain
Thoroughly rinse the surface using a garden hose or low pressure power washer (max pressure 500psi)
Direct the power washer wand with the grain of the wood
Do not leave the wand on the wood as this may mark the wood surface
Allow the wood to dry completely before proceeding to step 2

STEP 2 - Application of Sansin Wood Lightener

Dissolve the bag of wood lighter in 5.75 - 7.5 litres of water
Spray the Wood Lightener evenly on total cleaned wood surface
Allow the Wood Lightener to neutralize the treated wood surface for at least 10 minutes
Rinse off with water
Allow the wood to completely dry before sanding

Sansin Wood Lightener Application Instructions

Preparation

Substrate must be dry 
Temperature above 10°C-50°F
Spray vegetation with water or shield off before and during application 
Protect bordering areas with drop sheets and/or tape off with poly 
Do not allow this product to contact metal, fabric, floor coverings or outdoor furniture
Keep children and pets away from work area while using Wood-Lightener™

Application Methods

Dissolve Wood-Lightener in 1.5 – 2.0 gal (5.75 – 7.5L) of water depending on the
amount of brightening you require.
Always ensure a liberal and uniform application.
Apply using a brush, roller or spray to a dry wood surface
On vertical surfaces start at bottom and work up
Allow Wood-Lightener to work 5-15 minutes to revive the natural wood colour.
Do not allow Wood-Lightener™ to dry
Do not apply in direct sunlight
Thoroughly rinse with water using a garden hose or pressure washer (maximum pressure 500 PSI)
Ensure thorough rinse as a slight residue can affect the coating performance.
Allow wood to completely dry

Working Procedure
Do not allow to dry as this will require reapplication
Do not apply in direct sunlight
Allow the product to work 5-15 minutes
Thoroughly rinse the surface using a garden hose or low pressure power washer (max pressure 500psi)
Direct the power washer wand with the grain of the wood
Do not leave the wand on the wood as this may mark the wood surface
Allow the wood to dry completely

Environment

Taking advantage of nature

Modified natural oils and resins are carried deep into the wood's cell structure using one of nature's commonplace miracles - water. As the water evaporates, Sansin bonds directly with a wood substrate, forming a tough, durable barrier that won't crack, peel or blister. 

Sansin Enviro Stains are created using the same principle used for thousands of years. In fact, the ancient people of Norway took resin and gums from the heartwood of trees, warmed it and applied it to their Stave Churches with a broom, buildings which are still standing to this day. 

Wide spectrum of natural colour tones

With Sansin Enviro Stains, not only can you protect your wood naturally, you can also invite the beauty of nature into your life. Sansin's collection of 79 unique colours is inspired by the stunning beauty of our world - deep blue of the summer's sky, the rich yelows of a ripe harvest and the pure tones of a sandy beach. 

Natural protection

Sansin doesn't just stain your wood; it actually becomes an integral part of your wood's cell structure, protecting it naturally from within. Because Sansin stains are water-borne, they can be applied even to wood with a high moisture contect, with no harmful impact to the environment.

The science behind healthy wood

Wood is a tremendously versatile material - and as long as it's protected, a very strong and durable one. Water, ultraviolet (UV) rays and fungi can all seriously damage your wood. 

Traditional petroleum and acrylic-based coatings protect wood by forming a surface film which repels water and UV rays. Unfortunately, this tends to prevent evaporation, trapping moisture in the making it prone to decay. 

  • FSC
  • PEFC
  • Trada member
  • tdca TIMBER DECKING AND CLADDING ASSOCIATION
  • Responsible purchaser
  • Cedar Shake & Shingle Bureau
  • nbs plus
  • Secured by