Open navigation

No. 1 Grade (Blue Label) Western Red Cedar Shingles

(exc VAT) £450.00 (inc VAT) £540.00

3-7 day delivery service available

Delivery options and pricing calculated at cart

 

Scroll to view more information on this product

Coverage per bundle (approx.) m2
1 bundle on roofs with 19º > pitch 2.32m2
1 Bundle on roofs with a pitch 14 - 19º 1.76
1 Bundle on vertical sidewalls 3.45
450.00

This product is temporarily out of stock.
It is due to come back in stock imminently.
For more information call 0151 495 3111.

At a glance

  • Reduced by 15%
  • Recommended for premium applications where a high quality finish is required
  • Smooth, taper-sawn with a natural appearance
  • Please note that trade packs are not checked so some damage may be present

Recommended for many applications where a good quality finish is required

The premium grade of shingles suitable for high-end roofs and wall cladding applications. These top-grade shingles are 100% heartwood, 100% clear and 100% edge grain with no defects. Always specify No.1 Blue Label to ensure product quality, correct grading and consistency.

Cedar shingles are produced by cutting blocks from the log to the desired length. Shingles are then taper sawn to size. This type of smooth sawn architecturally uniform cedar shingle is preferred for its natural and tailored appearance and is used on traditional and modern residential and non-residential structures.

Coverage per bundle (approx.) m2
1 bundle on roofs with 19º > pitch 2.32m2
1 Bundle on roofs with a pitch 14 - 19º 1.76
1 Bundle on vertical sidewalls 3.45
Read more

Technical

Coverage per bundle (approx.) m2
1 Bundle on roofs with 19º+ pitch 2.32m2
1 Bundle on roofs with a pitch 14 - 19º  1.76m2
1 Bundle on vertical sidewalls 3.45m2

Approximated Nails usage guide - 1 kilo of 1.8 x 31mm Stainless Steel Annular Ringshank Nails will be required to fix 4 bundles of shingles.

Recommended use - The premium grade for many applications where a good quality finish is required.

Batten Spacing - Space battens to coincide with the weather exposure. Spacing between adjacent shingles (joints) should be a minimum of 6mm and a maximum of 9mm. Joints in any one course should be separated not less than 38mm from joints in adjacent courses and in any three courses, no two joints should be in direct alignment.

Product Links & Downloads

Environment

This product carries Programme for the Endorsement of Forest  Certification  (PEFC)

The PEFC Council is an independent, non-profit, non-governmental organisation founded in 1999 which promotes sustainably managed forests through independent third party certification. The PEFC provides an assurance mechanism to purchasers of wood and paper products that they are promoting the sustainable management of forests.

PEFC works throughout the entire forest supply chain to promote good practice in the forest and to ensure that timber and non-timber forest products are produced with respect for the highest ecological, social and ethical standards. Thanks to its  eco-label, customers and consumers are able to identify products from sustainably managed forests.

Silva Timber meets the requirements for PEFC Chain of Custody within the BM TRADA Certification Limited Scheme for TRADA - Trak chain of custody certification.

Certificate number: BMT-PEFC-0319

Western Red Cedar is the ultimate green building material. It is legally, responsibly and sustainably harvested in the publicly managed forests of British Columbia, Canada. Less than 1% of standing timber is harvested each year.

For each tree harvested, three are replanted to ensure the forests will exist in perpetuity. Western Red Cedar has a low impact on the environment throughout its life cycle. It requires significantly less energy to produce than man-made alternatives and is bio-degradable.

  • FSC
  • PEFC
  • Trada member
  • tdca TIMBER DECKING AND CLADDING ASSOCIATION
  • Responsible purchaser
  • Cedar Shake & Shingle Bureau
  • nbs plus
  • Secured by