Coverage:
1 bundle = 5.03 linear metres
Certi-Ridge™ hip & ridge units are pre-manufactured caps for hips and ridges made from number one grade cedar shingles. Their use makes considerable savings in construction time. Each unit is fastened together by 2 staples which allow sufficient flexibility to accomodate a range of pitches. Cappings should be laid with alternate bevels and concealed nailing. Weather exposures should be at the same gauge as the field of the roof. For additional weatherproofing install a strip of Type IF roofing felt under the capping.
Length: 18" (450mm)
Width: 7" (175mm) minimum (measured over the top at the butt end)
Bundle: Hip & ridges are supplied in bundles of 36 units; 18 left-hand and 18 right-hand bevels.
Certi-Label™ Confidence
Not all cedar shake and shingle products are alike. Certi-label products, manufactured by Cedar Shake & Shingle Bureau members, assure you of the highest quality standards. Member mills have committed to consistent quality through independent third-party inspections by accredited agencies. Each bundle of product has the mill's distinctive Certi-label tucked under the bundle strap. Asking for "the blue label" or "number one blue label" is not specific enough. Cedar Bureau members' products are the only ones with the Certi brand name on the label.
