Post Base with Standoff

• Features 25mm standoff height above concrete floors to reduce the potential for decay at post and column ends.
• ABE base design includes anchor bolt adjustment slot. Four-sided standoff plate increases download support and provides attractive appearance.
• PBS must be set when concrete is poured.
• ABE and U may be attached to anchor bolt set when concrete is poured or by means of a chemical or expansion anchor in existing concrete.

Material:

• Pre-galvanised mild steel, see table; CB -- 5.0mm mild steel.

Finish:

• CB -- Hot-dip galvanised.

• For use with 90x90mm posts.
• Use all specified fasteners.
• Not recommended for installations where top of post/column is not restrained such as some fence applications.
• Embed PBS into wet concrete up to the bottom of 25mm standoff base plate.
• ABE and U-for pre-pour installed anchors, embed 100mm into concrete. For epoxy or wedge anchors, select and install according to anchor manufacturer's recommendations; anchor diameter shown tech info. Install required washer -- included.