Osmo Bangkirai Oil

At a Glance

Sizes: 750ml / 2.5 litre.
Easy spray application.
Protects, maintains and enhances exotic hardwood garden furniture, decks and fencing.
Satin-matt finish.
Water-resistant, dirt-repellent and simple to maintain.

Please note: Packaging may vary. Known as "006 - Bangkirai" or "006 - Natural Shade".

Providing a satin-matt, smooth finish, Osmo Bangkirai Wood Oil is highly water-resistant, dirt-repellent and offers easy maintenance.

Osmo Bangkirai Oil provides a high coverage rate. As a micro-porous finish, Osmo Bangkirai Oil allows the wood to breathe, regulating the moisture content and minimising the risk of splitting, cracking, peeling or flaking.

With easy application, no sanding is required during maintenance, simply apply a further coat! The resulting surface from Osmo Bangkirai Oil is tested to be resistant against liquids such as wine, beer, soft drinks, tea, fruit juice, milk and water etc, in accordance with German regulation standards.

Environment

Natural ingredients

Osmo Bangkirai Oil is based on vegetable oils. These natural ingredients penetrate into the timber, keeping it flexible and healthy and preventing drying or brittleness.

Environmental concerns

Osmo Bangkirai Oil is free from biocides or preservatives.

Natural beauty of oils and waxes

Wood is a natural material, the cell structure, similar to our skin, can take on and release moisture, it breathes. To ensure that this exchange is not prevented we have created finishes especially suited to the character of the wood.

Osmo natural wood finishes are based on oils and waxes, the oil penetrates into the wood surface, protecting from deep within. The waxes form an elastic, micro-porous surface which protects the wood from external influences. The wood remains naturally beautiful, protected and durable.

Pricing

Price

Size	Price per Tin	Equivalent Price per Litre
750ml	£21.16£25.39	£28.21£33.86
2.5 litre	£64.29£77.15	£25.72£30.86

Technical Information

Usage & Application

Number of coats recommended: 2.
Drying time (to touch): 12 hours.
Time to re-coat (between applications): 12 hours.
Usage: protect and maintain wooden decking, garden furniture and screens.
Recommended application: for best results apply to timber with a sawn textured face or sand surface using an orbital sander and 80 grit sandpaper.

Approximate Coverage

24 square metres per litre with one coat on smooth wood.

Coverage will vary depending on the type of wood, age and surface texture.

Application & Maintenance Advice

Surface preparation

Ensure the wood surface is clean, free from dust and loose fibre and dry.
Existing paints, coats and varnishes must be removed prior to application
If possible, apply an initial coat to all sides of the wood before installation when protecting new wood.
For hardwoods with especially high oil content, leave to weather for about 2-3 months.

Application instructions

Osmo Bangkirai Oil is ready to use from the tin.
Ensure finish is stirred well
Use a stiff nylon brush or soft cloth and apply a thin coat evenly and thoroughly along the wood grain.
Wipe any excess fluid away once finished
Leave for approximately 12 hours, then apply a second coat as above.

Drying time

Osmo paints dry through oxidation - therefore require good ventilation to dry. Approximately 10-12 hours should be expected per coat.
Make sure furniture is thoroughly dry before putting into use.

Maintenance

Osmo Bangkirai Oil provides a very simple surface to clean. Simply use a moist cloth. Particularly difficult stains can be removed with Osmo Liquid Wax Cleaner.

Always refer to the packaging and relevant safety information before using Osmo Bangkirai Oil.

For full protection against timber weathering, cracking, swelling and shrinkage, use with Osmo End Grain Wax to seal the end grain of the wood.

No sanding required

Osmo natural wood finishes can be simply recoated without the need for sanding. This also allows for users to touch up small areas quickly.

Exceptional Coverage

Containing a high quantity of pigments and oils, Osmo wood finishes leave a stunning surface finish after just one or two coats, without the need for a primer or base coat.

This means you can achieve near to double the square meter coverage with just one tin compared to an ordinary finishing system.

When It comes to the Osmo paint range, no pre-priming is required, saving time and money.

Natural Ingredients

Osmo Bangkirai Oil is based on vegetable oils. These natural ingredients penetrate into the timber, keeping it flexible and healthy and preventing drying or brittleness.

Environmental Concerns

Osmo Bangkirai Oil is free from biocides or preservatives.

The Natural Beauty of Oils and Waxes

Wood is a natural material, the cell structure, similar to our skin, can take on and release moisture, it breathes. To ensure that this exchange is not prevented we have created finishes especially suited to the character of the wood.

Osmo natural wood finishes are based on oils and waxes, the oil penetrates into the wood surface, protecting from deep within. The waxes form an elastic, micro-porous surface which protects the wood from external influences. The wood remains naturally beautiful, protected and durable.

Downloadable Information