Highly effective cleaning and maintenance concentrate for everyday spills, marks and stains
Osmo Wash and Care is a special cleaning concentrate for wooden and cork floors finished with Osmo Hardwax-Oil (Polyx®-Oil). It can also be used on other oiled/waxed wooden surfaces and is also suitable for laminate floors, varnished floors, stone floors, PVC, plastic and other water resistant surfaces.
Osmo Wash and Care is highly effective and makes the floor surface more resistant to soiling and water. This water soluble product provides a quick, easy and thorough floor maintenance solution - even for large high traffic areas.
Simply add Osmo Wash and Care to water and wipe the floor with a damp mop or cloth. The Osmo Opti- Set (with the white Micro-mop Plush) is ideal for this purpose.
Osmo Wash and Care cleans the surface and freshens up the floor at the same time. It does not leave traces of residue or stripes, nor does it form a film on the surface, therefore it can be used as often as necessary.
Ingredients
Osmo Wash and Care is based on natural vegetable oils (coconut oil). 5-15 % vegetable soaps (anionic surfactants) 1-5 % non-ionic surfactants
Additives: Care components, suspending agent and Isothiazolinone preservative (CAS 55965-84-9).
Health and environment
Osmo Wash and Care is based on natural vegetable oils (coconut oil). It does not contain any superfluous colour or scent substances. Osmo Wash and Care is free from organic solvents, formaldehyde and amines. It is certified as biodegradable according to the environmental requirements of EN29888 L25, 1993.
Osmo only manufacture and supply products which are safe and environmentally friendly during production as well as for application resulted in the successful certification according to DIN EN ISO 9001:2000 (quality management) and DIN EN ISO14001 (environmental management).
Uses
Osmo Wash and Care is specially developed for cleaning of wooden and cork floors with Osmo Hardwax-Oil (Polyx®-Oil) surface and other oiled/waxed wooden surfaces.
It is also suitable for varnished floors, stone floors, plastic-surfaces, PVC and other water-resistant surfaces. Can be used in automatic cleaning machines (foam retarded).
Colour shade
8016 Wash and Care, colourless
Dosage
Approximately 1 cover cap of Wash and Care per litre of water.
Can sizes
1 litre; 5 litres; 25 litres
Preparation
Clean the surfaces from coarse dust with a broom, or optimal with the Osmo Opti-Set (with the green Dust-mop).
Method of application
Osmo Wash and Care is a concentrate. Approximately 1 cover cap of Wash and Care is sufficient for one litre of water. It is ideal for use with the Osmo Opti-Set (with Micro-mop Plush) for an easy and simple wet cleaning of all floorings.
Mop dry to avoid penetration of water into joints of floor boards, especially when used on varnished floors.
Hint for automatic cleaning machines:
Can be used in automatic cleaning machines (foam retarded). Please follow the operating instructions of the machine and the instructions of the floor producer.
Tip for heavy satins: For partial heavy stains (e.g. marker of felt-tip pens) you may try to use the not diluted concentrate. Afterwards remove any Wash and Care with a moist cotton cloth.
Persistant stains and refreshing
To remove extremely persistent stains on oiled/waxed wooden surfaces and general refreshing we recommend the well proven Osmo Liquid Wax Cleaner, based on natural vegetable oils and waxes (not water-soluble). Osmo Liquid Wax Cleaner is also available as a spray. It will also revive the appearance of the surface. For complete floor renovation of Osmo Hardwax-Oil (Polyx®-Oil) surfaces just a further coat of Osmo Hardwax-Oil (Osmo Polyx®-Oil) after cleaning.
Cleaning of tools
Wash out with water.
Storage
Can be stored up to 5 years or longer if can is full and tightly closed. Opened
container should be used up within 12 month.