Open navigation
Checkout (0) £0.00

You have no items in your shopping cart.

  • Home /
  • Owatrol Deks Olje D.2 High Gloss Finish for use with D.1

Owatrol Deks Olje D.2 High Gloss Finish for use with D.1

(exc VAT) £27.74 (inc VAT) £33.29

Next working day delivery available on products ordered before 11am.

Delivery options and pricing calculated at cart

 

Scroll to view more information on this product

PRICE PER LITRE (EX VAT)
PRODUCT 1l tin 2.5l tin 20l
Deks Olje D.2 £27.74 £25.99 £22.28
27.74

* Required Fields

(exc VAT) £27.74 (inc VAT) £33.29

Description

Owatrol Deks Olje D.2 provides a stunning high gloss varnish finish when applied as an overcoat to penetrating oils such as Deks Olje D.1 or Owatrol Oil.

Silva Timber is an Owatrol Authorised Partner

At a glance

  • For use with Deks Olje D.1 or Owatrol Oil when a high gloss finish is desired
  • Flexible film resistant to peeling, flaking or cracking
  • Highly transparent varnish finish to enhance wood's natural beauty
  • Easy to maintain, no sanding or stripping required
  • Provides long term protection
Please click images to view Please swipe image to view more

Owatrol Deks Olje D.2 applies a flexible, high-gloss film which resists peeling, cracking or flaking, offering long term protection.

  • Do not dilute or thin Deks Olje D.2

    • Application recommendations

    • For best results, apply 6 coats of Deks Olje D.2
    • Allow a minimum of 12 hours between coats for drying
    • Do not sand inbetween coats
    • Allow to dry for 3-4 days before putting back into use
    • Any drips or run-off should be dried immediately

    Coverage: 1 litre will cover approximately 15 square metres

    Application tools: Apply with a brush or roller

    Application temperature: 8oC - 35+oC

    Drying time: 12 hours

    Clean-up: White spirit

    Read more

    Technical

    Coverage/Maintenance

    • Number of coats recommended: 6 (all should be applied within one month)
    • Drying time (to touch): 12 hours. If applying to a boat, allow 3 days for DEKS OLJE® D.2 to set-up and dry before putting the boat in service
    • Time to re-coat (between applications): 12 hours
    • Usage: exterior wood, e.g. cladding, garden furniture and fencing (excluding ThermoWood). Interior wood e.g. panelling and joinery. Marine wood above waterline e.g. handrails, trim, wheel house. DEKS OLJE® D.2 is very slippery, especially when wet, and we therefore do not recommend the use of it on decks and other areas where it will be walked on
    • Recommended application: for best results surfaces must be clean, dry and free of dirt, grease, grime, mildew and previous coatings. DEKS OLJE® D.2 should only be applied to surfaces treated with DEKS OLJE® D.1* or previously finished with DEKS OLJE® D.2

    Approximate Coverage

    15 square metres per litre with one coat on smooth wood.

    Coverage will vary depending on type of wood, age and surface texture.


    Maintenance Cycle

    1-4 years on all surfaces.

    How frequently maintenance coats are required will depend on the quality of prior preparation, quality of application and weather exposure levels.

    Product Links & Downloads

    Finishing & Protection

    It is recommended that a finish is applied to all surfaces, including ends, before installation. The type of coating will be determined by the final finish and appearance desired.

    Prefer the silver-grey look?

    Sioo Impregnation quickly provides a clean wood surface with an attractive silvery-grey finish often desired but seldom achieved from new wood or damaged applications.

    What is weathering?

    There is a risk involved when leaving wood exposed to the elements. During the weathering process wood can appear unsightly as the material can blacken due to moisture getting into the fibres and pulling out tannins and extractives. Finish protects the wood from moisture absorption and UV degradation.

    Application & Maintenance Advice

    Suggestions prior to applying Owatrol Deks Olje D.2

    • Timber must first be treated with a penetrating oil such as Owatrol Deks Olje D.1 or Owatrol Oil. 
    • Ensure timber is clean and free from dirt and all contamination
    • Only apply Owatrol Deks Olje D.2 in dry conditions, do not use if wet weather is forecast during the application or drying period
    • Owatrol Deks Olje D.2 results in a slippery finish and as such is unsuitable for footfall areas such as decks
    • Do not dilute or thin Deks Olje D.2

    Application recommendations

    • For best results, apply 6 coats of Deks Olje D.2
    • Allow a minimum of 12 hours between coats for drying
    • Do not sand inbetween coats
    • Allow to dry for 3-4 days before putting back into use
    • Any drips or run-off should be dried immediately
    • FSC
    • PEFC
    • Trada member
    • tdca TIMBER DECKING AND CLADDING ASSOCIATION
    • Responsible purchaser
    • Cedar Shake & Shingle Bureau
    • Secured by