Owatrol Deks Olje D1 Wood Saturating Oil

From £19.79 £16.49 per litre

As Owatrol Deks Olje D.1 can be used both above and below the waterline, the finish is often specified for application in marine environments, such as on boat decks, marinas and pools.

Silva Timber is an Owatrol Authorised Partner.

Step 1 of

Details
  • Product Name: Owatrol Deks Olje D1 Wood Saturating Oil
  • Size:
  • Length:
  • SKU: OWATROL D1
  • Price:
£
£
Owatrol Deks Olje D1 Wood Saturating Oil
SKU: OWATROL D1

Price: £0.00
Inc. VAT
Price: £0.00
Excl. VAT
Enter a new project name
Quantity
Coverage Calculator
Get an estimate
Area Sqm:
Height(M):
Width(M):
Reset fields
Calculate
A wastage allowance of 10% is built-in for your convenience.
?
SKU: OWATROL D1

At a Glance

  • Sizes: 1 litre / 2.5 litre / 20 litre.
  • Saturates and protects all woods, provides a silken matt finish.
  • Excellent penetration and enhances the wood's natural grain.
  • Deep penetrating to protect against moisture ingress.
  • Easy maintenance - no sanding or stripping required.

Recommended for use on all interior and exterior wood types, particularly Western Red Cedar & hardwoods such as Ipe & Yellow Balau, for decks, cladding, garden furniture, fences, stairs, boats and doors.

Owatrol Deks Olje D.1 will not blacken timber and replaces the natural oils lost from the wood through weathering and the natural elements. 

As Owatrol Deks Olje D.1 can be used both above and below the waterline, the finish is often specified for application in marine environments, such as on boat decks, marinas and pools. 

Saturating oil can be applied to both horizontal and vertical installations and can provide an excellent base for traditional underwater coatings where necessary. Owatrol Deks Olje D.1 is suitable for all types of woods, both soft and hard, whether oily or dense. 

Deks Olje D.1 provides a transparent finish which enhances the natural grain of the timber. The deep penetrating formula protects against moisture ingress and stabilises the timber.

For a satin-matt finish use Owatrol Deks Olje D.1 alone. If a high gloss finish is desired, use Owatrol Deks Olje D.2 as an overcoat. 

Price
Size Price per Tin Equivalent Price per Litre
1 litre £20.45£24.54 £20.45£24.54
2.5 litre £49.00£58.80 £19.60£23.52
20 litre £329.76£395.71 £16.49£19.79

Maintenance

Number of coats recommended: 2.
Drying time (to touch): 24 hours.
Time to re-coat (between applications): 15-30 minutes.
Usage: exterior wood, e.g. cladding, decking and fencing (excluding ThermoWood). Interior wood e.g. flooring, panelling, stairs, joinery. Marine wood e.g. hulls, portals, trim, wheelhouse.
Recommended application: for best results surfaces must be clean, dry and free of dirt, grease, grime, mildew and previous coatings.

Approximate Coverage

1-4 square metres per litre with one coat on smooth wood.

Coverage will vary depending on the type of wood, age and surface texture.

Maintenance Cycle

1-4 years on all surfaces.

How frequently maintenance coats are required will depend on the quality of prior preparation, quality of application and weather exposure levels.

Application and Maintenance Advice

Properties

  • Optimised for thick, dense, greasy and difficult to impregnate woods.
  • Drives out moisture and air by penetrating deep into pores; non-film building.
  • Protects against humidity and its effects.
  • Transparent – keeps the woods natural appearance.
  • A matt and natural finish.

Application instructions

  • Apply a first coat of Owatrol Deks Olje D.1, allowing the finish to penetrate timber for around 15 to 30 minutes.
  • Apply a second coat, again allow the finish to penetrate for around 15 to 30 minutes.
  • Repeat the re-coating process until the timber is fully saturated and will not accept any more finish.
  • Wipe off or brush away any excess oil that will not penetrate to avoid any glossy/irregular spots.
  • Ensure D.1 does not become touch dry in-between coats. Recoats should be on a wet-on-wet basis.
  • Always refer to the packaging for full application procedures.

Courier Delivery

Products:

Woodcare, fasteners and accessories.

Leadtime:

Most items will be delivered next working day but please allow up to 3 working days especially during peak periods.

Cost:

£7.50 (ex VAT) for mainland UK deliveries.

£18.70 (ex VAT) for Northern Ireland.

Other postcode areas - POA.

Free delivery is offered on orders over £150 + VAT to UK mainland postcodes only.

You can view our detailed delivery charges and services here.