Maintenance
- Number of coats recommended: 6 (all should be applied within one month).
- Drying time (to touch): 12 hours. If applying to a boat, allow 3 days for DEKS OLJE® D.2 to set-up and dry before putting the boat in service.
- Time to re-coat (between applications): 12 hours.
- Usage: exterior wood, e.g. cladding, garden furniture and fencing (excluding ThermoWood). Interior wood e.g. panelling and joinery. Marine wood above waterline e.g. handrails, trim, wheelhouse. DEKS OLJE® D.2 is very slippery, especially when wet, and we, therefore, do not recommend the use of it on decks and other areas where it will be walked on.
- Recommended application: for best results surfaces must be clean, dry and free of dirt, grease, grime, mildew and previous coatings. DEKS OLJE® D.2 should only be applied to surfaces treated with DEKS OLJE® D.1* or previously finished with DEKS OLJE® D.2.
Approximate Coverage
15 square metres per litre with one coat on smooth wood.
Coverage will vary depending on type of wood, age and surface texture.
Maintenance cycle
1-4 years on all surfaces.
How frequently maintenance coats are required will depend on the quality of prior preparation, quality of application and weather exposure levels.
Application Recommendations
- Do not dilute or thin Deks Olje D.2.
- For best results, apply 6 coats of Deks Olje D.2.
- Allow a minimum of 12 hours between coats for drying.
- Do not sand in-between coats.
- Allow to dry for 3-4 days before putting back into use.
- Any drips or run-off should be dried immediately.
- Coverage: 1 litre will cover approximately 15 square metres.
- Application tools: Apply with a brush or roller.
- Application temperature: 8oC - 35+oC.
- Drying time: 12 hours.
- Clean-up: White spirit.
Application & Maintenance Advice
Suggestions prior to applying Owatrol Deks Olje D.2
- Timber must first be treated with a penetrating oil such as Owatrol Deks Olje D.1 or Owatrol Oil.
- Ensure the timber is clean and free from dirt and all contamination.
- Only apply Owatrol Deks Olje D.2 in dry conditions, do not use if wet weather is forecast during the application or drying period.
- Owatrol Deks Olje D.2 results in a slippery finish and as such is unsuitable for footfall areas such as decks.
- Do not dilute or thin Deks Olje D.2.
Application recommendations
- For best results, apply 6 coats of Deks Olje D.2.
- Allow a minimum of 12 hours between coats for drying.
- Do not sand in between coats.
- Allow to dry for 3-4 days before putting back into use.
- Any drips or run-off should be dried immediately.
Courier Delivery
Products:
Woodcare, fasteners and accessories.
Leadtime:
Up to 3 working days.
Cost:
£5.00 (ex VAT) for mainland UK deliveries.
£12.75 (ex VAT) for Highlands & Islands.
£18.25 (ex VAT) for Northern Ireland, Isle of Man, Isle of Scilly.
£23.25 (ex VAT) for Isle of Wight.
Free delivery is offered on orders over £100 + VAT to UK mainland postcodes only.
You can view our detailed delivery charges and services here.