Owatrol Solid Colour Stain – Up to 15-Year Warranty

From £29.04 £24.20 per litre

Open up a vast range of opportunities to coat various wood products in a wide spectrum of colours. Owatrol Solid Colour Stain finishes all timber with a beautiful matt finish in the desired colour.

Silva Timber is an Owatrol Authorised Partner.

Quantity

Total (Inc. VAT)

Total (Excl. VAT)

Coverage Calculator

Cancel

Get an estimate

Area Sqm:

Height(M):

Width(M):

Reset fields

Calculate

A wastage allowance of 10% is built-in for your convenience.

SKU: OWATROL STAIN

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Product Description

At a Glance

Sizes: 125ml sample pot / 1 litre / 2.5 litre.
Waterborne opaque wood finish.
Matt finish. Apply to softwoods, hardwoods and thermo-heated wood.
No peeling and cracking even on the floor subject to abrasion.
Long-lasting performance - 15-year warranty on cladding/fencing applications.
Available in a wide range of colours in 1 litre or 2.5-litre tins.
Click here to view the colour range available.

The Owatrol Solid Colour stain range opens up a vast range of opportunities to coat various wood products in a wide spectrum of colours. Ideal for coating decks, cabins, cladding, fencing, screens, outdoor furniture and more, Owatrol Solid Colour Stain finishes all timber with a beautiful matt finish in the desired colour. Owatrol Solid Colour Stain has been known to last for over a decade without intensive maintenance.

As a premium finish, Owatrol Solid Colour stain is fortified with Owatrol E-B to provide unrivalled adhesion to exterior vertical and horizontal timber without extensive priming, sanding or preparation.

Owatrol Solid Colour Stain finishes to a hard-wearing stain, offering performance in high-traffic areas of footfall, or long lasting style for cladding, fences, screens and more.

The Solid Colour Stain solution provides protection against moisture damage, and the flexible, breathable solution will not peel, blister, crack or flake.

Pricing

Price

Size	Colour	Price per Tin	Equivalent Price per Litre
1 litre	All colours	£29.70£35.64	£29.70£35.64
2.5 litres	All colours	£60.50£72.60	£24.20£29.04

Technical Information

Coverage / Maintenance

Number of coats recommended: 2.
Drying time (to touch): 24-48 hours.
Time to re-coat (between applications): 3-4 hours.
Usage: exterior wood, e.g. cladding, decking and fencing.
Recommended application: for best results surfaces must be clean, dry and free of dirt, grease, grime and mildew.

Approximate Coverage

8-10 square metres per litre with one coat on smooth wood.

Coverage will vary depending on the type of wood, age and surface texture.

Maintenance Cycle

1-4 years on all surfaces.

How frequently maintenance coats are required will depend on the quality of prior preparation, quality of application and weather exposure levels.

Where to Use

Exterior: cabins, decks, cladding, fences, shutters, outdoor furniture.
Softwood, Hardwood, Tropical and Thermo Heated Wood.
New or old wood.
Previously painted or stained wood surfaces.

Preparation of Wood

New Wood :
- New wood often has a hard shiny surface known as mill glaze, this and the moisture content of new wood prevents the proper adhesion of any coating. Initially, apply a coat of SEASONITE, and allow the wood to weather a minimum of 6 months. After 6 months apply SOLID COLOUR STAIN.
Weathered Wood - grey, blackened or stained :
- Restore and clean the wood with NET-TROL.
- If necessary sand the wood (100 grit).
Previously coated wood :
- Strip and neutralise with NET-TROL.
- On Oak and Chestnut, manually or mechanically sand the wood, dust off and wash with NET-TROL to clean. Allow to dry.

Recommendations Before Applying

Purchase sufficient product for the whole job and mix all product together before starting, to avoid colour variances.
Stir or shake can well.
Wood surface must be clean, dry (3 days of dry weather) and free of dirt, mildew and other contaminants before applying the SOLID COLOUR STAIN.
Do not dilute.
Before starting the application, test the colour choice on a small area and allow to dry to determine the final colour.

Tannin Bleed

Please note we cannot guarantee this product will prevent tannin bleed.
Tannin is a water-soluble extractive that occurs naturally in many wood species including Western Red Cedar. The extractives can be dissolved and leached from the wood by water. When the water moves to the surface of the cladding it evaporates and can leave behind extractives in the form of a reddish-brown stain.

Application

Apply a coat of SOLID COLOUR STAIN.
Allow to dry 3-4 hours.
Apply a second coat.
When applying by spray, always back-brush or back-roll immediately after application to ensure uniformity of colour, coverage and penetration.

Maintenance

Surfaces with harsh exposure to weather or traffic will wear more quickly than other areas. In these cases, clean the damaged areas and apply the product in accordance with the directions.
Clean coated surfaces especially decks as part of a normal maintenance plan, observing any precautions.
Warranty 5 years on horizontal surfaces. 15 years on vertical surfaces.

Downloadable Information