Open navigation

Pressure Plus

(exc VAT) £42.62 (inc VAT) £51.14

Next working day delivery available on products ordered before 11am.

Delivery options and pricing calculated at cart

 

Scroll to view more information on this product

PRODUCT PRICE PER LITRE (EX VAT)
Pressure Plus £11.28
42.62

* Required Fields

(exc VAT) £42.62 (inc VAT) £51.14

Description

Pressure Plus contains a pigment which transforms pressure treated timber to a beautiful natural wood tone, even if the pressure treatment has turned the timber green.

At a glance

  • One step application during or after construction
  • Enhanced wood stability and performance
  • Ideal for new and existing pressure-treated decks and structures

Specially formulated for pressure treated timber

Pressure Plus has been specifically engineered to protect pressure treated timber, improving the dimensional stability and overall performance.

Pressure Plus contains a pigment which transforms pressure treated timber to a beautiful natural wood tone, even if the pressure treatment has turned the timber green.

This translucent finish is deeply penetrating and so only needs a single coat to protect the timber from moisture ingress and UV rays.

Read more

Technical

Coverage/Maintenance

  • Number of coats recommended: 1
  • Drying time (to touch at 20ºC): 24 hours
  • Usage: exterior wood e.g. decking and fencing
  • Recommended application: for best results apply to timber with a sawn textured face or sand surface using an orbital sander and 60-80 grit sandpaper

Coverage

23.2 - 32.5 square metres per 3.78 litre tub.


Coverage will vary depending on type of wood, age and surface structure.


Maintenance Cycle

2-4 years on horizontal surfaces (decking).


How frequently maintenance coats are required will depend on the quality of prior preparation, quality of application and weather exposure levels.

Application Instructions

Application Methods

Inspect wood surfaces for defects and make any necessary repairs.

Use the appropriate Sansin wood cleaner and/or wash the entire surface with a minimum 3000 PSI pressure washer using clean water and proper technique. Be careful not to erode the surface.

For best results and a smooth level surface, sand the surface area well with a 60-80 grit paper using a random orbital sander.

Follow by power washing, vacuuming or using compressed air for proper cleaning. Surface must be clean, free from dust, dirt, grease, wax or any existing coatings.

Always flood surface to the penetrating point of saturation.

  • FSC
  • PEFC
  • Trada member
  • tdca TIMBER DECKING AND CLADDING ASSOCIATION
  • Responsible purchaser
  • Cedar Shake & Shingle Bureau
  • Secured by