Sansin Purity Interior Glacier

From £24.40 £20.33 per litre

Sansin Purity Interior Glacier is a tough, non-yellowing finish that offers glass-like beauty and clarity, perfect for high-wear surfaces such as cabinetry, shelves, doors, furniture and even floors. Sansin Purity Interior Glacier provides a lacquer finish that meets and exceeds all KCMA benchmarks, defining the beauty of your wood and adding character and dimension.

Sansin Purity Interior Glacier is available in flat, satin and gloss finishes.

Step 1 of

Details
  • Product Name: Sansin Purity Interior Glacier
  • Size:
  • Length:
  • SKU: SANSIN PURITY GLCR
  • Price:
£
£
Sansin Purity Interior Glacier
SKU: SANSIN PURITY GLCR

Price: £0.00
Inc. VAT
Price: £0.00
Excl. VAT
Enter a new project name
Quantity
Coverage Calculator
Get an estimate
Area Sqm:
Height(M):
Width(M):
Reset fields
Calculate
A wastage allowance of 10% is built-in for your convenience.
?
SKU: SANSIN PURITY GLCR

At a Glance

  • Sizes: 946ml / 3.78 litre.
  • A crystal clear finish for high wear interior surfaces.
  • Perfect for cabinetry, walls, doors, windows and furniture.
  • Two-coat application.
  • Environmentally friendly.

Sansin Purity Interior Glacier is UV resistant, washable, environmentally friendly, low in volatile organic compounds, high in solids and non-flammable, with easy soap and water clean-up. 

For optimum UV protection or if a special colour or toning is desired, use a pigmented version of Sansin Purity Interior Stain as the first application.

Designed to the exacting standards of master joiners and architects, the Sansin Purity range is known for its extraordinary beauty and clarity of colour. A wide range of stains, finishes and oils offer durable protection against staining, dirt, odours and general wear and tear.

Price
Size Finish Price per Tin Equivalent Price per Litre
946ml All finishes £30.73£36.88 £32.48£38.98
3.78 litre All finishes £76.84£92.21 £20.33£24.40

Coverage / Maintenance

Number of coats recommended: 2.

Drying time (to touch at 20ºC): 30 minutes.

Time to re-coat (between applications at 20ºC): 1 hour.

Usage: interior wood e.g. joinery, cabinetry and cladding.

Recommended application: for best results apply to timber with a sawn textured face (SAWTEX) or sand surface using an orbital sander and 120-150 grit sandpaper.

Approximate Coverage

A 3.78-litre tin will cover 37.2 - 46.5 square metres for a single coat.

Coverage will vary depending on the type of wood, age and surface structure.

Maintenance Cycle

If the wood surface is exposed because of damage, decide whether to repair the complete board or spot repair. In either case, clean the surface to remove contamination and allow to dry. Follow with sanding to smooth the surface appropriately then apply the same coating schedule to match the initial application.

For proactive maintenance coats, gently wash the surface and remove all contamination by an agreeable method being careful not to over-wet the surface. Allow the surface to dry completely. If necessary sand using a 220-320 grit paper. Apply a maintenance coat of Purity Interior Clear using an appropriate applicator. See directions for further details.

How frequently maintenance coats are required will depend on the quality of prior preparation, quality of application and exposure levels.

Woodcare, fasteners, and accessories are all dispatched using our courier service and are available in a choice of express (2-3 days) or next working day delivery. Next working day delivery is available for UK mainland customers ordering before 11am.

Delivery charges vary based on the products you have ordered, the location of your delivery, the value of your order and the delivery service you require.

Free delivery is offered on orders over £150 + VAT to UK mainland postcodes only.

You can view our delivery charges and services here.