Sansin Wood Cleaner

£10.31 £8.59 per litre

Sansin Wood Cleaner is a ready to use formula suitable for removing extreme weathering, water stains, mould and mildew, while restoring the natural colour of wood. Sansin Wood Cleaner is biodegradable and rinses off with water for an easy to use solution.

Step 1 of

Details
  • Product Name: Sansin Wood Cleaner
  • Size:
  • Length:
  • SKU: SANSIN WC
  • Price:
£
£
Sansin Wood Cleaner
SKU: SANSIN WC

Price: £0.00
Inc. VAT
Price: £0.00
Excl. VAT
Enter a new project name
Quantity
Coverage Calculator
Get an estimate
Area Sqm:
Height(M):
Width(M):
Reset fields
Calculate
A wastage allowance of 10% is built-in for your convenience.
?
SKU: SANSIN WC

At a Glance

  • Size: 3.78 litre. 
  • Removes weathering, mould, algae, mildew and iron stains.
  • Easy to use - simply rinse off with water.
  • Biodegradable with low VOC.
  • Recommended for new and existing wood surfaces such as decks, fencing and cladding.
  • Suitable for interior and exterior use.

Sansin Wood Cleaner is a ready to use formula suitable for removing extreme weathering, water stains, mould and mildew while restoring the natural colour of the wood. Sansin Wood Cleaner is biodegradable and rinses off with water for an easy to use solution. 

Recommended for use on new and old wood surfaces such as decks, cladding, fencing and screens

Also includes free 1x 250g of Sansin Wood Lightener. Wood Lightener brightens all wood surfaces, restoring the original natural colour of the wood after Sansin Wood Cleaner treatment. 

Sansin Enviro Stain®

One question we're often asked is whether you should use a water-based or oil-based coating when protecting wood surfaces. With Sansin Enviro Stains, you can have the best of both worlds.

Enhanced durability and moisture control

Sansin lets wood 'breathe' more freely, dramatically improving dimensional stability and allowing the wood to adjust naturally to moisture levels in the environment. Once it bonds with your wood, Sansin forms a long-lasting shield that aggressively repels condensed water while allowing water vapour to escape. 

Protection from UV radiation

As well, the paraffin waxes used to protect against water in many water and solvent-based coatings are easily damaged by exposure to UV radiation - just 5 hours of direct sunlight can reduce water repellency by over 60%. Like your own skin, your home needs dependable UV protection. Sansin's modified natural oils and resins are impregnated with special UV protectants so every exposed cell of your wood is protected. Because of their unique formulation, Sansin Enviro Stains also protect naturally against wood decay. 

Sansin Enviro Stains are designed to keep your wood healthy, just as Mother Nature intended. Whether it's your home, your deck or your furniture, Sansin provides the long-lasting, beautiful protection that your home deserves. 

Every wood coating needs to be maintained - it's just easier with Sansin. 

Where successive film-build coatings can darken and peel, Sansin is designed to wear gently over time. Keeping your home protected involves only a simple cleaning and maintenance coat, applied as needed. 

Committed to conservation

Sansin Enviro Stains are low-odour, easy to use, maintain, and they are easy on the environment. Sansin's commitment to conservation is paramount and reflected both in their products and business practices. 

Sansin Wood Cleaner Application Instructions

Preparation

The substrate must be dry.
Temperature above 10°C-50°F.
Spray vegetation with water or shield off before and during application. 
Protect bordering areas with drop sheets and/or tape off with poly.
Do not allow this product to contact metal, fabric, floor coverings or outdoor furniture.

Application method

Apply a liberal and uniform application using a brush, roller or spray. 
On vertical surfaces start at the bottom and work your way up.

Working procedure

Do not allow to dry as this will require reapplication. 
Must lightly mist with water to keep active. 
Do not apply in direct sunlight.
Allow the product to dissolve coating for at least 15 minutes. 
During the waiting period, you may agitate the coating using a stiff brush (always agitate in the direction of wood grain).
Thoroughly rinse the surface using a garden hose or low-pressure power washer (max pressure 500psi).
Direct the power washer wand with the grain of the wood. 
Do not leave the wand on the wood as this may mark the wood surface. 
Allow the wood to dry completely before applying the wood lightener.

Sansin Wood Lightener Application Instructions

Preparation

The substrate must be dry. 
Temperature above 10°C-50°F.
Spray vegetation with water or shield off before and during application. 
Protect bordering areas with drop sheets and/or tape off with poly. 
Do not allow this product to contact metal, fabric, floor coverings or outdoor furniture.
Keep children and pets away from the work area while using Wood-Lightener™.

Application methods

Dissolve Wood-Lightener in 1.5 – 2.0 gal (5.75 – 7.5L) of water depending on the amount of brightening you require. 
Always ensure a liberal and uniform application. 
Apply using a brush, roller or spray to a dry wood surface.
On vertical surfaces start at the bottom and work up. 
Allow Wood-Lightener to work 5-15 minutes to revive the natural wood colour. 
Do not allow Wood-Lightener™ to dry. 
Do not apply in direct sunlight. 
Thoroughly rinse with water using a garden hose or pressure washer (maximum pressure 500 PSI). 
Ensure thorough rinse as a slight residue can affect the coating performance. 
Allow the wood to completely dry.

Working procedure
Do not allow to dry as this will require reapplication. 
Do not apply in direct sunlight.
Allow the product to work 5-15 minutes.
Thoroughly rinse the surface using a garden hose or low-pressure power washer (max pressure 500psi). 
Direct the power washer wand with the grain of the wood.
Do not leave the wand on the wood as this may mark the wood surface. 
Allow the wood to dry completely.

Environment

Taking advantage of nature

Modified natural oils and resins are carried deep into the wood's cell structure using one of nature's commonplace miracles - water. As the water evaporates, Sansin bonds directly with a wood substrate, forming a tough, durable barrier that won't crack, peel or blister. 

Sansin Enviro Stains are created using the same principle used for thousands of years. In fact, the ancient people of Norway took resin and gums from the heartwood of trees, warmed it and applied it to their Stave Churches with a broom, buildings which are still standing to this day. 

Wide spectrum of natural colour tones

With Sansin Enviro Stains, not only can you protect your wood naturally, but you can also invite the beauty of nature into your life. Sansin's collection of 79 unique colours is inspired by the stunning beauty of our world - the deep blue of the summer's sky, the rich yellows of a ripe harvest and the pure tones of a sandy beach. 

Natural protection

Sansin doesn't just stain your wood; it actually becomes an integral part of your wood's cell structure, protecting it naturally from within. Because Sansin stains are water-borne, they can be applied even to wood with a high moisture content, with no harmful impact on the environment.

The science behind healthy wood

Wood is a tremendously versatile material - and as long as it's protected, a very strong and durable one. Water, ultraviolet (UV) rays and fungi can all seriously damage your wood. 

Traditional petroleum and acrylic-based coatings protect the wood by forming a surface film which repels water and UV rays. Unfortunately, this tends to prevent evaporation, trapping moisture in the making it prone to decay. 

Price
Size Price per Tin Equivalent Price per Litre
3.78 litre £32.47£38.96 £8.59£10.31

Coverage / Maintenance

  • Drying time (to touch at 20ºC): do not allow to dry, allow the product to dissolve coating for at least 15 minutes.
  • Usage: removes extreme weathering, water stains, mould and mildew while restoring the natural colour of the wood.
  • Recommended application: for best results apply to dry timber and brush off loose dirt before application.

Approximate Coverage

A 3.78 litre tin will cover 9.3-18.6 square metres for a single coat.

Coverage will vary depending on the type of wood, age and surface structure.

Woodcare, fasteners, and accessories are all dispatched using our courier service and are available in a choice of express (2-3 days) or next working day delivery. Next working day delivery is available for UK mainland customers ordering before 11am.

Delivery charges vary based on the products you have ordered, the location of your delivery, the value of your order and the delivery service you require.

Free delivery is offered on orders over £150 + VAT to UK mainland postcodes only.

You can view our delivery charges and services here.