Siberian Larch Boards – 21 x 96mm - 236.70 Lineal Metres - PK1046

Coverage Calculator

Cancel

Get an estimate

Area Sqm:

Height(M):

Width(M):

Reset fields

Calculate

A wastage allowance of 10% is built-in for your convenience.

Was £670.20 £558.50 Now £469.14 £390.95

This pack of Siberian Larch Boards is available as part of our clearance sale.

The pack contains 236.70 lineal metres in 3.6m and 3.9m board lengths.

We have a few similar packs which we are selling at heavily reduced prices to clear. If you are prepared to do a bit of trimming and tidying up, then you can grab a bargain and help us to clear some space.

These boards could be used for board-on-board cladding, planters, treehouses, fence boards etc.

Before purchasing, please read the full product description and technical information in the tabs below.

Clearance packs are available for collection or local delivery only.

Quantity

Total (Inc. VAT)

Total (Excl. VAT)

SKU: PK1046

Skip to the end of the images gallery

YouTube Terms & Conditions.

Skip to the beginning of the images gallery

Product Description

At a Glance

Species: Siberian Larch.
Grade: SILVA A Grade.
M/C: Kiln dried 16 – 18% (+/-2%).
Finished size: 21 x 96mm.
Profile: Board.
Lengths: 17/3.6m, 45/3.9m.
Unit of sale: Pack (236.7m).
Price per m: £1.65 excl. VAT (normally £2.36).
Suggested uses: Cladding / Horizontal slatted screens.

Quality Description

We call these packs ‘Pull-Out’s’. They consist of boards we’ve pulled-out during the order picking process because they do not meet our in-house grading standard.

The severity of the defects varies from minor damage, dirt, marks, knot holes, staining to longer splits and damaged sections that will require trimming out. Pull-out packs contain boards with some or all these defects.

Pull-out packs contain a lot of recoverable wood, so if you are prepared to put a bit of work in, they offer excellent value for money.

Tips

Sand out any marks/stains with a random orbital sander using 60/80 grit sanding discs.
Trim out larger defects using a crosscut saw.
Rip damaged pieces with a circular saw or table saw to make smaller sections (trim etc).
Optimise material by planning positioning of boards and any cuts to be made beforehand.
Use the least attractive pieces in less visible areas, e.g., round the back of a building.
Use an exterior wood filler in knotholes.
Apply a coating such as Sansin SDF. Opaque colours will obscure most defects.

Clearance packs are available in Widnes for you to look at before you buy. They are sold at heavily reduced prices on the understanding that you purchase the full pack as is. They are sold as seen, and we are unable to exchange individual boards for any reason.

This pack is available for collection from Widnes or Harmondsworth, or for delivery in our local areas (North or South).

Delivery