Simpson Strong Tie Stand Off Post Base

From £12.24 (inc VAT) £10.20 (ex VAT)

This Simpson Strong Tie stand off post base is installed into wet concrete and has a 25mm standoff height to reduce the potential for decay at the post and column ends. It features an ABE base design which includes an anchor bolt adjustment slot.

Quantity

Total (Inc. VAT)

Total (Excl. VAT)

SKU: SST-SOPB

Coverage Calculator

Cancel

Get an estimate

Area Sqm:

Height(M):

Width(M):

Reset fields

Calculate

A wastage allowance of 10% is built-in for your convenience.

Skip to the end of the images gallery

YouTube Terms & Conditions.

Skip to the beginning of the images gallery

Product Description

At a Glance

Four-sided standoff plate increases support and provides an attractive appearance.
Pre-galvanised mild steel.
May be attached to anchor bolt set when concrete is poured.
ABE base design includes an anchor bolt adjustment slot.
PBS must be set when concrete is poured.
ABE and U may be attached to anchor bolt set when concrete is poured or by means of a chemical or expansion anchor in existing concrete.
Save 10% when buying as a kit (10 pcs).

Application Guide

For use with 90x90mm posts.
Use all specified fasteners.
Not recommended for installations where the top of the post/column is not restrained such as some fence applications.
Embed PBS into wet concrete up to the bottom of the 25mm standoff base plate.
ABE and U - for pre-pour installed anchors, embed 100mm into concrete. For epoxy or wedge anchors, select and install according to anchor manufacturer's recommendations; install required washer (included).

Technical Information