Thermally Modified Pine Bevel Cladding - Factory Coated Light Grey – 24 x 133mm - 65 Lineal Metres - PK0910

Coverage Calculator
Get an estimate
Area Sqm:
Reset fields
A wastage allowance of 10% is built-in for your convenience.
Was £375.84 £313.20 Now £150.34 £125.28

This pack of thermally modified pine bevel cladding is factory coated on all sides in grey.  It is available as part of our summer clearance sale. 

The pack contains 65 lineal metres which will cover an area of 7.8 square metres.  It's ideal for a small project like a playhouse.

Before purchasing this pack, please ensure you have read the full product description information in the tab below.

Please note, this pack is available for collection only from Widnes. 

Thermally Modified Pine Bevel Cladding - Factory Coated Light Grey – 24 x 133mm - 65 Lineal Metres - PK0910

Price: £375.84
Inc. VAT
Price: £313.20
Excl. VAT
Enter a new project name
SKU: PK0910

At a Glance

  • Species: Thermally modified pine.
  • Finished size: 24 x 133mm.
  • Profile: Rebated Bevel.
  • Lengths: 3/1.83m, 24/2.44m.
  • Unit of sale: Pack (65m).
  • Total coverage: 7.8 square metres.
  • Price per m: £1.93 (normally £4.82).
  • Suggested uses: Playhouse / planters.

Quality Description

This pack has been in storage for some time and is very tatty, with knocks, marks, and dust.  It could be tidied up, and to get the best out of it, would need touching up or preferably overcoating entirely.  Sansin ENS in Cashmere Grey could be used for this.

We have priced it super cheap to move it quickly.  The buyer will need to collect it from Widnes.

Note: these are general clearance pack tips, so may not all be relevant to this pack.


  • Sand out any marks / stains with a random orbital sander using 60 / 80 grit sanding discs.
  • Trim out larger defects using a crosscut saw.
  • Rip damaged pieces with a circular saw or table saw to make smaller sections (trim etc).
  • Optimise material by planning positioning of boards and any cuts to be made beforehand.
  • Use the least attractive pieces in less visible areas, e.g., round the back of a building.
  • Use an exterior wood filler in knotholes.
  • Apply a coating such as Sansin SDF. Opaque colours will obscure most defects.

Clearance packs are available in Widnes for you to look at before you buy. They are sold at heavily reduced prices on the understanding that you purchase the full pack as is. They are sold as seen, and we are unable to exchange individual boards for any reason.  

This pack is available for collection from Widnes only. 

Scheduled Collection


2-3 weeks.