Winkler Skermo Terrazze 5 litre

At a Glance

• Ready to use formula.
• Only requires one coat.
• 100% active material.
• 10-year guarantee.
• Can also be used on vertical concrete or masonry structures.
• Zero VOC content. 
• Size: 5 litre.

Surface Preparation

Clean the substrate surface thoroughly in order to eliminate dirt, dust, loose materials or debris, and any form of oil or grease.

Remove any eventual spots shown on tiles by using a neutral detergent.

Restore any damaged grout line by using Winstucco Flex Thin* (for grout lines until 2 mm wide) or Winstucco Flex Medium* (for grout lines from 2mm to 12mm wide).

Apply the product on dry or slightly damp surface, not wet.

Application

Apply Skermo Terrazze liberally with a brush or roller to the tiled surface ensuring the grouted area is adequately covered too. 

15 minutes after the application remove any remaining traces of the product using a clean rag.

Protect from water for at least 18 hours after the product is applied. After such period, the treated surface is walkable again.

Skermoa Terrazze can be used on the following surfaces:

• Ceramic
• Porcelain grès
• Stoneware
• Terracotta Floors
• Clinker
• Concrete
• Any other cementitious floor

Important Information

Apply the product in conditions that allow curing in the fastest time possible. We strongly recommend performing a preliminary mock-up application on a small portion of the substrate, in order to observe the colour/chromatic stability of the surface. Protect from water for at least 18 hours after the product is applied. Apply at temperatures between +5°C and +35°C.

Consumption

On tiled surfaces - 15m²/litre.
On concrete walls - 5m²/litre.

Consumption rate may vary depending on the porosity of the substrate.

Storage

The product, kept in its unopened and undamaged packaging, has an 18-month shelf life. Store between +5ºC and +35ºC.

Winstucco Flex is a special order item, please contact us to order this product.