Specially formulated concrete and masonry protection
Sansin Aqua-Gard is a clear, water protection product for new and existing above ground concrete and masonry substrates. Unlike regular sealers Sansin Aqua-Gard penetrates and bonds to the substrate, allowing it to breathe while protecting the concrete and masonry from water and contaminants entering the substrate.
Clear, will not discolour
Can be custom tinted
Penetrates deep into the substrate
Prevents freeze-thaw damage
Reduces efflorescence, splitting and cracking
Protects reinforcing steel from erosion
Keep substrate cleaner
Sansin Paint and Stain Application Instructions
Pretest a hidden area. Check if surface has been pretreated. Appearance of a white residue after drying indicates a pre-treated surface.
Apply by sprayer, brush or roller
Do not dilute
Do not apply in heat of day or direct sunlight
One coat application
Can be applied at any temperature above freezing (ideal temperature between 15-20_C)
Clean surface before application
Apply liberally until the surface is saturated, do not allow to puddle.
DO NOT SPILL ON ALUMINIUM/WINDOWS ETC.
Allow 28 days for new concrete to cure before treatment.
See Directions For Use